IP: What is the Voice Recovery CD used for?
IP: What is the Voice Recovery CD used for?
The CD supplied also contains an image for a recovery CD (PN 750100Z). This CD will allow systems that have become
unusable, for example because the IP address is unknown, to be completely reset. To use the recovery CD carry out the following steps:
1. First burn the recovery disk ISO image onto a CD.
2. Attach an external USB CDROM drive to the VoICE unit’s USB port.
3. Restart the VoICE unit so it boots from the CDROM instead of the internal system.
4. The CDROM system with return the unit to its factory shipment condition. During this phase the LEDs on the front will flash sequentially to indicate that the recovery is in progress. When recovery is complete all the front LEDs will flash together.
5. When the VoICE unit restore is complete remove the external CDROM drive from the VoICE unit.
6. Restart the VoICE unit.
7. Configure the VoICE unit as described in the Voice IP Interface User Manual part # 810339Z.
unusable, for example because the IP address is unknown, to be completely reset. To use the recovery CD carry out the following steps:
1. First burn the recovery disk ISO image onto a CD.
2. Attach an external USB CDROM drive to the VoICE unit’s USB port.
3. Restart the VoICE unit so it boots from the CDROM instead of the internal system.
4. The CDROM system with return the unit to its factory shipment condition. During this phase the LEDs on the front will flash sequentially to indicate that the recovery is in progress. When recovery is complete all the front LEDs will flash together.
5. When the VoICE unit restore is complete remove the external CDROM drive from the VoICE unit.
6. Restart the VoICE unit.
7. Configure the VoICE unit as described in the Voice IP Interface User Manual part # 810339Z.
Looking for labels? They can now be found in the details panel on the floating action bar.
Related content
IP-Voice: Voice 2 First time setup instructions
IP-Voice: Voice 2 First time setup instructions
More like this
IP-Voice: VoICE unit locked up requiring power cycle to recover
IP-Voice: VoICE unit locked up requiring power cycle to recover
More like this
IP: How do I get the MAC address on a Voice interface?
IP: How do I get the MAC address on a Voice interface?
More like this
IP: Voice 2 upgrade from version 2.0.5 to version 2.1.0 fixes
IP: Voice 2 upgrade from version 2.0.5 to version 2.1.0 fixes
More like this
IP: How do I upgrade a Voice 2 interface from version 2.0.5 to version 2.10?
IP: How do I upgrade a Voice 2 interface from version 2.0.5 to version 2.10?
More like this
IP Voice: VoICE units disconnect after about 15 min and they reconnect automatically at times
IP Voice: VoICE units disconnect after about 15 min and they reconnect automatically at times
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.