/
Wireless: Using the DX410 with an RS703 and TWC701

Wireless: Using the DX410 with an RS703 and TWC701

Apr 06, 2019

In the back of the DX410 there is a button to change the XLR connections from a Clear-Com format to a RTS format.
RTS mode also works with Clear-Com RS703 beltpacks. In the RTS mode both channels coming from the RS703 are
then available on the base station via a single 3-pin XLR connection to Channel A or Channel B.  Be sure to set the
appropriate channel selection via the front panel controls.  
The BP410 beltpacks can select either channel to communicate with but not simultaneously. However the local headset
user on the front of the base station will have the ability to talk to either or both channels simultaneously.











Keywords: TWC-701, TWC-704, party, line, belt, pack, analogue, 2-wire, TW, PL, two, wire

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.