/
Wireless: Can I connect FSII transceivers over IP networks?
Wireless: Can I connect FSII transceivers over IP networks?
By Administrator
Apr 06, 2019
Yes you can. Now that the new splitter FSII-SPL has a local sync generator you can use 3rd party E1 to TDMoIP media convertors from the base or matrix to the splitter link over an IP network. Suitable convertors are available from RAD or Rakuten. The splitter transceivers will allow local beltpack seamless roaming since the sync signal is not transferred over the E1/IP link but is locally generated at the splitter.
see FSII splitter quick start guide for details : http://www.clearcom.com/upload/download/FreeSpeakII_v2.1/FreeSpeakII_Splitter_QuickStartGuide-399G182A.pdf
NOTE: The DECT Sync from the base will not make the trip with the E1 data to the fiber-connected transceiver, so do not expect any handoffs to/from the antennas on the fiber-connected antennas.
see FSII splitter quick start guide for details : http://www.clearcom.com/upload/download/FreeSpeakII_v2.1/FreeSpeakII_Splitter_QuickStartGuide-399G182A.pdf
NOTE: The DECT Sync from the base will not make the trip with the E1 data to the fiber-connected transceiver, so do not expect any handoffs to/from the antennas on the fiber-connected antennas.
, multiple selections available,
Related content
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
WIRELESS: SFP For Single Fibre Cable on FSII-BASE-II to FSII-SPL
More like this
Can I use FSII US/Canada beltpacs & transceivers in Europe?
Can I use FSII US/Canada beltpacs & transceivers in Europe?
More like this
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
Wireless: FS II transceiver antenna coverage capabilities / expectations
Wireless: FS II transceiver antenna coverage capabilities / expectations
More like this
Wireless: What type of SFP does the new FSII-SPL (splitter use)
Wireless: What type of SFP does the new FSII-SPL (splitter use)
More like this
UPDATE - Alternating The Same Channels on FS Edge System - Can You Use The Same Two Channels Between Transceivers?
UPDATE - Alternating The Same Channels on FS Edge System - Can You Use The Same Two Channels Between Transceivers?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.