Wireless: How do I configure FS-II Base-II to RTS Beltpacks (Call&Talk on both channels)

To use an RTS beltpack with call and talk functionality on both channels with a Freespeak-II Base-II you have to do the following:
Step 1: Put the 2-Wire Interface (A/B) or (C/D) into RTS mode and turn on power. Both physical ports on the interface are linked together in to one RTS-capable port.
Step 2: Assign the interface ports to the channels you want to use and switch on RX call signaling for both ports.
Step 3: Activate the listen key for the selected channels.
Step 4: Connect the beltpack to either of the 2-Wire interface ports you configured.
Now you can use your RTS beltpacks or any other beltpacks in RTS-compatible mode.