/
Wireless: What are the hopping specifications in TEMPEST wireless?

Wireless: What are the hopping specifications in TEMPEST wireless?

Apr 06, 2019
Translate page

Tempest uses FHSS (Frequency Hoping Spread Spectrum) Technology
It also employs dual transmit of audio packets to provide a robust audio/data connection between the base unit and wireless beltpacks.
Each data packet(audio/data) is sent on one frequency and then the system hops to another frequency and then sends the same 2nd data packet again.


Tempest General:  Frequency Band:             2400 –2483.5 MHzRF Scheme:                      FHSS with TDMANumber of Freqs:           43Occupied Bandwidth:     1.2MHzHop duration:                  5mS (200 hops/sec) (dwell time)  Tempest Base:  Output power:                18dBm (63mW) conductedAntennaGain:                  +2dBi (whip) Transmit time:                 890uS/5mS hop (17.8%)Receiversensitivity:        -90dBm for 10^-5 BERBelts supported:             5belts per base  Tempest Belt:  Output power:                18dBm (63mW) conductedAntennaGain:                  +2dBi (patch, horizontally polarized) Transmit time:                 325uS/5mS hop/Belt (6.5%)Receiver sensitivity:       -90dBm for 10^-5 BER 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.