/
Party-Line: Can I use the hot mic out of a V-Series panel to feed the external line input on a MA-704 IFB panel?

Party-Line: Can I use the hot mic out of a V-Series panel to feed the external line input on a MA-704 IFB panel?

Apr 06, 2019

Yes, the balanced line level hot mic output on a V-Series panel cab be fed to the Encore MA-704 IFB controller. 
The MA-704 external line level input is pinned as follows:
Tip = Audio input (unbalanced)
Ring = Controller signal
Sleeve = Ground
Take an unbalanced feed from the V-Series and feed the audio to the Tip on the TRS connector
Use the ground on the V-Series panel and wire it to the Sleeve on the TRS connector. 
The Control signal on the Ring of the TRS connector is not used...the control signal is for an Encore station to mute its mic
to the comms channels while talking to an IFB destination.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.