/
Wireless: Freespeak II Base has Flashing Yellow Antenna LED(s)
Wireless: Freespeak II Base has Flashing Yellow Antenna LED(s)
By Administrator
Apr 06, 2019
Question: We noticed on our FSII-Base station that antenna #8 and antenna #10 are blinking after FSII base start-up, the splitter supporting antenna #8 and antenna #10 are powered off.Prior to this issue, there's also complains that antenna #10 is not working fine (sometimes the antenna amber light isblinking, sometimes it is stable).
Answer: Make sure the splitter is powered up before switching on the base station Otherwise, the basestation mightpower the splitter. In this case there might be insufficient power. The Cellcom/ Freespeak base for FS-I or FS-II will,on boot up, detect if there is already power on the E1 CAT 5 connector. Ifthere is, then it will not turn on local power to the splitters.
In all accounts, we recommend the splitter is locally powered and if possible power the antennas locally - especially if they are on cable runs more than 250m on FS-II (300m in ideal conditions for FS-I/ Cellcom). FreeSpeak II antennas draws a bit more power.
Answer: Make sure the splitter is powered up before switching on the base station Otherwise, the basestation mightpower the splitter. In this case there might be insufficient power. The Cellcom/ Freespeak base for FS-I or FS-II will,on boot up, detect if there is already power on the E1 CAT 5 connector. Ifthere is, then it will not turn on local power to the splitters.
In all accounts, we recommend the splitter is locally powered and if possible power the antennas locally - especially if they are on cable runs more than 250m on FS-II (300m in ideal conditions for FS-I/ Cellcom). FreeSpeak II antennas draws a bit more power.
, multiple selections available,
Related content
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
More like this
Wireless: FSII Base II connected to 3rd party matrix causing audio feedback
Wireless: FSII Base II connected to 3rd party matrix causing audio feedback
More like this
Wireless: What type of SFP does the new FSII-SPL (splitter use)
Wireless: What type of SFP does the new FSII-SPL (splitter use)
More like this
Wireless: FS II transceiver antenna coverage capabilities / expectations
Wireless: FS II transceiver antenna coverage capabilities / expectations
More like this
Arcadia : Call light on FSII BP is always flashing (blinking)
Arcadia : Call light on FSII BP is always flashing (blinking)
More like this
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.