/
Matrix: How do I wire up a DIG-2 interface frame / card to support V-Series panels with T-Adapters?

Matrix: How do I wire up a DIG-2 interface frame / card to support V-Series panels with T-Adapters?

Apr 06, 2019

The DIF-2 interface panel / DIG-2 interface card supports up to (4) V-Series panels (rotary, pushbutton or lever key) with installed T-Adapter modules using standard CAT-5 cable.  The diagram below shows the wiring scheme for two V-Series panels connected to a DIG-2 interface card.  The DIG-2 card has specific analog connections that are routed to the Eclipse frame MVX-A16 ports and digital connections that route out to the V-Panel T-Adapter RJ-45 connector (do not use the ethernet RJ-45 jack or the matrix comms RJ-45 jack).



















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.