/
Matrix: Can I split the functionality of the E-QUE card properties?

Matrix: Can I split the functionality of the E-QUE card properties?

Apr 06, 2019
Answer : Yes using EHX 7.x software you can split the functionality of the EQUE card, the options are: -
  • E-Que E1 or T1 Trunk (the whole card is set to trunk mode for intelligent linking to other Eclipse HX matrices)
  • E-Que E1 or T1 Direct (the whole card is set to audio only direct mode for connection to 3rd party E1 or T1 devices - including Drake 4000 Hi-Que cards)
  • E-Que E1 or T1 Direct/Trunk (the card is used in split mode)
- the top half of the card is used for direct mode connection for connection to 3rd party E1 or T1 devices - the bottom half of the card is used for trunk mode for intelligent linking

The top half of the card uses the RJ45 port mark # 1 on the rear of the EQUE card The bottom half of the card uses the RJ45 port mark # 5 on the rear of the EQUE card 












By accessing the card properties screen in EHX software the user can select different codecs for the top and bottom halves of the cards as shown in the screen shot below:









From this screen the user can set the following parameters:
Clock Recovery
Codec Top Half
Codec Bottom Half
EM Signalling
Looking for labels? They can now be found in the details panel on the floating action bar.

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.