/
Partyline: Where are the stage announce connections on the RM-702 panel?

Partyline: Where are the stage announce connections on the RM-702 panel?

Apr 06, 2019

Question:  I don't see a 3-pin XLR connector for the stage announce output on the RM-702 panel.  How do I access this connection on the remote panel?

Answer:
The RM-702 stage announce output is located on the accessory DB-15F connector on the rear of the panel.  See the drawing below for the DB-15F pin outs
Pin 06 = + announce audio output
Pin 13 = - announce audio output
Pin 05 = Ground
To connect to the announce output, connect a shielded twisted-pair cable to pins #6 and #13 of the accessory connector and use pin #5 for connection of the shield.
A relay is provided that activates when the announce button is pressed and its contacts are also available on the accessory connector. The relay is rated for 2.0 Amps of DC current at 24 Vdc.
Stage Announce/Balanced Line Out
Type Balanced
Output Impedance >= 200Ω
Load Impedance >= 600Ω
















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.