Partyline, 2-Channel Beltpack/6-pin XLR input/4-pin headset

Clear-Com offers a range of 2 channel wired beltpacks
RS-602 (current)
The RS-602 is a 2-channel, dual listen monaural beltpack with a 4-pin male headset connector and 6-pin female/male loop through intercom line connectors. It requires YC-36 adapter to connect with standard 3-pin cabling, 2.5mm AUX headset connector (using CC-25) and an RS-232 data connector for programming.
The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.
Obsolete units RS-502
RS-201/mono
CP-100/2-CH
These are 6-pin XLR Intercom input, and 4-pin XLR Headset
Both channels are summed mono to the earpiece
Pins 5 and 6 of the Intercom Input is a balanced audio input.
(not in the RS-502, and the CP-100-2ch)

Please contact our Sales Department if there are any questions or if you model is not listed above
http://www.clearcom.com/product/partyline/wired-beltpack

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.