/
Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?

Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?

Apr 06, 2019

The PRC-2 receiver on block 24 is capable of being tuned from 614.400Mhz to 639.900Mhz in 100Khz increments using the two rotary switches recessed under the slide door cover on the side of the receiver.  See the picture below for the location of the two rotary switches. 




























The left hand rotary switch adjusts frequences in 1.6Mhz increments, the right hand switch adjusts frequencies in 100Khz increments.  The switches are both labeled from 0 to F, using the attached chart below the user can manually adjust the frequency of a block 24 receiver to match the frequency of a block 24 PTX-2 or PTX-3 IFB transmitter. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.