Wireless: CellCom base antenna screen shows antenna, but no BPs connect to it
A CellCom base station can show a connected CEL-TA antenna of the front panel display screen even though it may not have a good E1 data signal on pins 1 or 2 or pins 4 or 5 of the CAT-5 cable. This will show the following symptons on the CEL-TA antenna and the front panel ANTENNAS connected leds and front panel display antennas screen:
1. The yellow data led on the CEL-TA will not be lit or only flash on/off intermittently
2. The base station front panel ANTENNAs Ready display led will not light up
3. No CEL-BP beltpacks will jump on to this antenna (no 1 to 20 indication on the antenna display screen).
If these symptoms present themselves, check the following items to determine the issue:
1. The yellow data led on the CEL-TA will not be lit or only flash on/off intermittently
2. The base station front panel ANTENNAs Ready display led will not light up
3. No CEL-BP beltpacks will jump on to this antenna (no 1 to 20 indication on the antenna display screen).
If these symptoms present themselves, check the following items to determine the issue:
- damaged or broken CAT-5 cable to the suspect antenna
- check the suspect CEL-TA antenna RJ-45 connector for damaged or deformed pins
- check the Splitter RJ-45 connector to the suspect CEL-TA antenna for deformed pins
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.