/
Matrix: Can I wire up a footswitch to an ICS-2003 panel to toggle talks on/off?

Matrix: Can I wire up a footswitch to an ICS-2003 panel to toggle talks on/off?

Apr 06, 2019

The miscellaneous DB-15 connector on the rear panel of the ICS-2003 can be used to achieve toggling talks on and off via a foot switch.
Logic inputs 1 and 2 can be used to do this. Once the foot switch is wired to a logic input (logic 1 - pin 5, logic 2 - pin 12, logic grounds pins 4 and 11) the user will go to ECS and open the matrix hardware screen. Go to the port the ICS-2003 resides on and go to the advanced settings column and look for Logic Input 1 or 2 and select the function of the logic input via the pull down menu (for example select mic on/off or activate talk switch 1 or activate talk switch 2).
Once this is accomplished apply the change in ECS to enable the change in the panel.



































CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.