Matrix: How do you change the operation of a pair of FIM-202s to operate in "Multi-Mode"
Question: How do you change the mode of operation on a pair of FIM-202s from "single mode" to "multi-mode" operation? I didn't see any external or internal switches to accomplish this. Any help is appreciated.
Answer: What determines the operating mode for a pair of FIM-202s is the type of fiber cable used on the FIM-202 optical ST receptacles.
Single mode operation uses 8 micron diameter fiber cable with ST connectors at each end. Single mode operation allows for up to 12 miles distance between FIM-202 interfaces.
Multi-mode operation uses 50 to 62.5 micron diameter fiber cable with ST connectors at each end. Due to the larger fiber cable diameter and light dispersion within the cable multi-mode operation allows for only 2 to 3 miles distance between FIM-202 interfaces.
Fiber optical cable with ST connectors (note covers on fiber cable ends)
FIM-202 interface unit front panel view showing ST Receptacles for transmit and receive
FIBER CORE DIAMETER MAXIMUM FIBER LENGTH50 microns (multimode) 3 miles (5 km)62.5 microns (multimode) 2 miles (3 km)8 microns (single mode) 12 miles (20 km)
The FIM-202D will operate with either Single-Mode or Multi-Mode Fiber Optic Cable.
Note: only for sell in North America . Contact Clear-Com sales for other solutions if you are located outside of North America