Wireless: What is the purpose of the ferrite beads shipped with a CellCom system?
To meet FCC emissions requirements in the US a ferrite must be fitted on any CAT-5 cable plugged into either of the two E1 antenna ports labelled transceiver 1 and 2 on the rear of the CellCom base station. The ferrites are part of the system shipment.
The ferrite should be fitted at the base station end of the CAT-5 cable, as close to the base station as possible (see picture below).
The manufacturer of the ferrite is Wurth Elecktronix. The part number is 742 711 32