/
Matrix: Can we get a button on a panel to blink whenever there is audio present on a 4wire port

Matrix: Can we get a button on a panel to blink whenever there is audio present on a 4wire port

Apr 06, 2019
Translate page

Can we get a button to blink or flash with Voice activation on a panel?
This can be done by using the audio presence tally check box in ECS
In ECS go to setup hardware tab and select the 4wire port -
In the global advance settings -
Select the Audio Presence Tally check box, Download the changes to the matrix
When ever the incoming audio on the 4wire port is above the threshold setting then any panel with a key to the 4wire port will flash. to show that there is audio present on that 4wire port. The user may then press their listen key to hear the incoming audio from that external.
When the audio level drops below the threshold setting then the audio presence tally (flashing) will stop.
see attached

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.