/
Wireless: Mulit-linked Tempest 2400 system troubleshooting tips

Wireless: Mulit-linked Tempest 2400 system troubleshooting tips

Apr 06, 2019

Trouble shooting tips for a Tempest multi-linked system
Onsite issues1) 6 Base Stations linked together via Zsync2) 2.4 GHz3) Using Channel D multiplexer w/Directional antennas4) Dinosaur controls use static 2.4 also5) Can’t seem to get farther than 30feet from antennas w/ BPs
Troubleshooting tips 1) Check Radio versions...make sure all radios for base stations and beltpacks are  v1.18 
2) Need to assure all Net #s are 0-10, and not separated by 4 like we used to say3) Check for different lockout keys,each base4) Check all base stations are on the same firmware version 3.0.0 or later, Check all beltpacks are on the same firmware version5) If base starions have different firmware versions place highest versions at top tochain, descending6) Turn on one at a time and see where RF saturation / errors occurs7) Verify that the Zsync dongle is plugged into the first base station in the string of base stations

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.