Matrix: What are the EHX Software System Limits?
Solution update Aug 10, 2026
For EHX v15.0
Configuration Item | Limit (Max. Number) |
|---|---|
Fixed Groups | 999 (across whole linked set) |
Partylines | 399 (across whole linked set) |
Partyline members | 64 |
IFBs | 200 |
GPSF (General Purpose Special Functions) | 3200 These are Allocated by macros and controls. 3 GPSFs are used for a control. Capacity information is available in Diagnostics > Resource Chart > GPSF (hover over chart item for exact figures). |
Controls | 999 |
Physical ports | 496 (36 on Eclipse HX-PiCos) |
Beltpacks registered to the system | 320 |
Number of beltpacks actively in use | Combination of FS II, Icon and Edge: 255 max; FS Cell: 320 max |
Roles | 424 max (according to resource allocation, set in Preferences > Matrix Settings > Common Resources). Default: 300 |
Number of roles in a role team | 150 |
Matrices in a linked group | 64 |
Keys | 249,600 |
Key Groups | 100 (across whole linked set) |
Sort Groups | 64 per frame |
Agent-IC clients per frame | 255 |
Station-IC clients per frame | 255. If Station-IC is licensed locally, the maximum per frame is 320. |
Matrix entity aliasing
| 496/1024. Maximum aliases in a linked set system is 496. From Eclipse v14 and above, the limit increases to 1024. Additional aliases are stored in volatile memory and are lost on matrix reset. Enabled by editing the EHX.xml configuration file. |
Hardware Power Limits (dated Aug 10, 2026 )
Hardware limits vary depending on:
Matrix type
Card type
PSU type (One/Bel Fuse PSU 720379Z recommended)
Overall system usage
For precise calculations, use the Eclipse HX System Power Calculator available from the Clear-Com website and Solution Finder.
As a rough estimate, matrices support the following number of high-power cards:
Matrix Type | Maximum High-Power Cards |
|---|---|
Omega | 5 standard |
Median | 4 |
Delta | 3 |
High-Power Card Types
High-Power Cards |
|---|
E-IPA |
IVC-32 |
E-Que |
LMC-64 |
System Behavior When Limits Are Exceeded
Condition | System Response |
|---|---|
High-power card limit exceeded | CPU services only the supported number of cards, beginning with the lowest slot numbers |
Power limits breached | System alerts generated and event log messages recorded |
Ongoing power-limit condition | Warning message written to the event log every 10 minutes |
Attempt to install additional high-power card beyond limit | Warning message displayed during configuration |
==========================================================================================================
The following programming limits are shown for Eclipse HX v7.5.0 software going forwards: It could be very helpful on larger systems when setting up EHX system parameters.
EHX 7.5.0 Software Limits
The maximum number of ports is 496 for Omega / Median / Delta matrices (36 for Pico-HX) For Omega / Median / Delta matrices different card types use different port counts