/
Matrix: How do I add and program Expansion V-series panels in EHX

Matrix: How do I add and program Expansion V-series panels in EHX

Apr 06, 2019
Translate page

The V-series expansion panels can only be added or removed to the configuration (map) by going to Cards and Ports screen 
a) Power down the Main V-series panel (host panel)
b)  Make physical connections from the host panel rear (expansion out-RJ45) to the V-series expansion panel (expansion in RJ45) panel using a straight CAT5 cable.  Power up the host panel before applying power to the attached expansion panel.  
c) Power up the v-series expansion panel, it should sync up to the host panel  panel and go online.
d)  In EHX  software to go hardware > then  highlight the host panel port, then go to the advanced settings / panel options and select expansion panels, declare the expansion panel(s), 
e) Then do the panel programming screen and select the host panel > expansion panel and program the keys as per normal
make an "apply changes" download to complete the setup . Note the system may request a hardware reset .. this is normal as new hard has been added
Please see the details in the attachments
 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.