/
HelixNet: How are the HMS-4X interface slots numbered?

HelixNet: How are the HMS-4X interface slots numbered?

Apr 06, 2019

Question:  How can I tell the slot numbering on the back of a HelixNet HMS-4X main station? The interface slots don't
have any numbering scheme associated with them.

Answer:  Slot 1 is closest to the center of the HMS-4X main station, slot 2 is next and slot 3 is closest to the edge of
the main station as shown in the diagram below.











Any module type can be inserted into a specific interface slot, but the user will have to declare the interface type in the web
browser or via the front panel progamming menus.  If the wrong type of interface card is selected the user will get an error
message in the web browser CCM. 
For each module, chose between 3 types:

  • None/Ethernet/Fiber

  • 2-wire

  • 4-wire




CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.