Clear-Com Solution Finder Home
Spaces
Apps
Templates
Create
Solution Finder
All content
Space settings
Shortcuts
Clear-Com Main Website
Clear-Com Main Website
This trigger is hidden
Contact Clear-Com
Contact Clear-Com
This trigger is hidden
How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden
Content
Results will update as you type.
Show more above
Wireless: Which frequency bank for PTX-3 & PRC-2 is best suitable for ENG application?
Wireless: Which relay is used for stage announce on the FSII BASEII and how does it work?
Wireless: Why am I getting "F" when I try to register one of my beltpacks?
Wireless: Why are we receiving "system busy" when we are the only using two BP200´s (the rest are turned off)?
Wireless: Why do we occasionally get a 'system busy' message on headsets when no-one is actually talking at the time?
Wireless: Why does my Tempest wireless intercom sound the way it does?
Wireless: Why Don't my FSII BP belt packs appear to register with the USB cable on my FSII-base2 when there is no antenna connected? They don't appear in the CCM either.
Wireless: Why have our WTR-680 beltpacks locked up and why are the LCD's not functional?
Wireless: Why is my CellCom making noise, motorboating, motor boating, ground loop?
Wireless: Why is my FreeSpeak making noise, motorboating, motor boating, ground loop?
Wireless: Why is there no Call Signal from my Tempest to my wired Clear-Com Party Line 2wire system?
Wirelles: Can I add Stage-Announce port to a WPL01 in the FSII config
Wireless; Can Tempest coexist with DX200 2.4GHz SSFH wireless intercoms?
Wireless:For FreeSpeak BaseStation, can the 2 party line channels and all 4 4 wire channels be used at the same time, giving 6 ch of independent comms?
Wireless: WTR-BAT wireless battery Material safety data sheet (MSDS)
Wireless: With the MD-XLR Adapter our headsets sound a little muffled. Why?
Wireless: With a FreeSpeak Base, can I connect a 2 x wire Partyline with a 4x 4-wire I/O?
Wireless: Will having 2 Tempest 2400 version 2.10.01 basestations next to each cause interference
Wireless: Will a 16 ohm impedance headset work on a WBS series beltpacks?
Wireless: Why when I have 4 Tempest belt packs on and when I turn on the 5th Tempest belt pack, the display tells me that slot is unavailable
Wireless CellCom / FS I: What do the 5 start up dots on the BP startup screen mean?
wireless : WTR / WBS 670/ 680 spare antenna parts
Wireless : Do you have a list of Tempest beltpack spare parts
Wireless : Can I extend the antenna on a DX210/410/300/100/121 by 40m (120ft)
Wireless : Audio distortion between DX, LQ and HelixNet
Wireles: What is a Reverse Polarized Connector?
Wireless: When I plug in the RTS line, my voice level in the Pro850 beltpac headset drops
Wireless IFB: How do I adjust the block 26 frequencies on my PRC-2 receiver?
Wireless IFB: How do I adjust the block 25 frequencies on my PRC-2 receiver?
Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?
Why do the LEDs on my CellCom/FreeSpeak basestation seem to lightly blink?
AC60-W-MOUNT AC-60 Charger Wall Mount
Can a CCT-9RT be used with a Tempest 2400 series?
Can a CCT-RT be used with the Tempest 900 series?
Can DX121 system interface with IFB and PK-7?
Can I Upgrade My FreeSpeak Base to the Latest Firmware?
Can I use single strand fiber / BiDirectionbal SFPs between my new Free Speak II base II and the new splitter?
Can we connect the DX100 to other bases?
Cellcom / Freespeak upgrade issue. FW Not loaded to both banks of RAM
Clearcom AC60 Battery Charging and UPS Supplies
DOES THE CEL-FS-CHRGR WORK WITH THE FSII?
Does the DX121 have a battery back up option
Drake 4000: Registering CellCom CEL-BP Beltpacks with CMAPSi.
DX100 Long Range / Repeater
DX Bases Primary and Secondary Mode
DX-410 - Too Many Buttons
Free Speak: Can I power a FS II Base II with an external battery?
Freespeak Event Log Info
Freespeak II (FSII) No Audio
Freespeak II antenna dimensions
FS Edge IP Transceiver LED Indications
FS II: Can't upgrade my FS-II belt packs using the serial cable
FS-II: IP antennas not working on Cisco WS-2960CX-8PC-L
FSII IP Transceiver LED Indications
FSII-BP19 BELT CLIP
HME DX Question for ISO. Why don't the wired system users hear it?
HME DX-210 vs 2x RTS Party Lines
How can I control the microphone on a FSII Beltpack remotely?
How do I connect my PC to the FSII Base-II?
How do I find the mDNS name of the IP-Transceiver (IP-Antenna)
How do I to find Tempest Base & Belt Firmware/Radio version Information?
How do we add an additional set of antennas for our Tempest system? Do you sell the hardware?
How does Tempest work with Wi-Fi all in the same band?
How to find which DECT (country, frequency) a CellCom or FreeSpeak I system has other than connecting to software?
How to replace the FSII BP Door (video)
How to replace the FSII BP Keypad (video)
How to set the switches to select frequency that the PRC-2 receives
How to Update a FSII BaseII Firmware/Software
I am end-user and I want to purchase AC40A battery charger. Can I purchase this from you?
I am looking for a battery for the tempest line, what is the part number?
I can't register my beltpacks to the DX210 base
I cannot find a DX product on my pricesheet
I have an existing DX210 system, can I attach a mic and speaker to it?
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
In a multiple BS200 (DX200) station setup, can beltpacs transition from one base station to the other, like a cell tower/phone system?
Independent audio program Input control for FSII beltpack
Information: Practical Wireless Spectrum Overview for EMEA and US
IPT: When trying to access an IP antenna's browser, sometimes the message "Not Found" is displayed.
Is the WBS-670/680 and the WTR-670/680 available in the C3 band?
Is the WBS-670/680 and the WTR-670/680 available in the C6 band?
Is the WTR-670/680 -C6 band available in the United States?