/
Wireless: What power options do I have with the FS II Transceiver?

Wireless: What power options do I have with the FS II Transceiver?

Apr 06, 2019

Question:  What are my power options using FS II Transceivers with Eclipse E-QUE card and with the FS II enabled base station?
Answer:
FS II Transceivers on a Freespeak II base station:
+24Vdc Power is supplied to both E1 connectors on the base station. This will allow the user to power connected splitters and transceivers directly from the base station. This mode of operation is good up to 600 - 700 feet of CAT-5 24 gauge cable. For longer CAT-5 runs it is advised that the user either locally power the CEL-SP splitter or locally power the FS II transceivers for reliable operation.
FS II Transceivers on a Eclipse Matrix running EHX 7.6.0 or higher system:
The E-QUE card E1 connectors do not supply +24Vdc. 
In order to power FS II transceiver antennas the user must - locally power a CEL-SP splitter if the user has configured the system in EQUE FSII TA-splitter mode or - directly (locally) power each FS II Transceiver if the user has configured the system in EQUE FSII TA-antenna mode

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.