/
Wireless: Connecting a Tel-14 to a Cellcom/Freespeak Base-station

Wireless: Connecting a Tel-14 to a Cellcom/Freespeak Base-station

Apr 06, 2019
Translate page

In order to connect a Tel-14 (telephone interface) to a Cellcom/Freespeak base-station, one needs to connect a CAT5 audio crossover cable from the Tel-14 Matrix port to one of the 4WIRE I/O of the base-station. This will the beltpacks on the basestation to talk to a user over the phone line.
Note that the Tel-14 can connect to 2 POTS (analogue fax) phone lines so using a second 4wire port of the base-station will allow for 2 phone connections.
The only setup on the Tel-14 unit is to place DIP switch #6, position 5 to OFF. Do this for A and B sides if you plan on using 2 phone lines.
Using the CellCom Configuration Editor or the base-station front panel, set the 4WIRE port as any other 4WIRE to be able to Talk and Listen from a belt-pack, the base-station or as a group for example composed of many belt-packs.
This setup allows for minimal and basic control. It works as follows; The remote caller will call the Tel-14The Tel-14 will automatically hook the connection (auto-answer) until the caller hangs up. The base-station and any belt-pack user set to talk to a 4WIRE port will be able to hear and talk to the caller.

Solution update: The Tel-14 interface needs to be housed in a IMF-102 frame. If Tel-14 is placed near a parallel telephone the operator can manually dial out from the phone and press the on hook button on the front of the TEl-14 unit to hold the line on once the call has been answered.In CellCom V2.0 or later the basestation supports IFB operation. The 4wire connected from the basestation to the TEL-14 could set up as a PGM/IFB line.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.