/
Partyline: How do I wire a audio program input to RS-702 beltpack?

Partyline: How do I wire a audio program input to RS-702 beltpack?

The RS-702 Encore Series Beltpacks are capable of accepting a balanced line level program audio feed. 

This is accomplished by using pins 5 and 6 of the 6-pin XLR intercom feed. The ground for the program audio feed is brought in on pin 1.

The thumb wheel control on the bottom pane of the RS-702 Beltpack only attenuates the signal received on Pins 5 & 6 of the XLR-6 connector.

It will NOT attenuate the program audio (signal embedded and sent through with the intercom audio signal of CH A/B) if the signal is sent through from the Mainstations.

Please see the diagram below for the locations of the pins.

 

Comments

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.