Matrix: What type of switch should I use with an IVC-32 / IP Panels?

Owned by Administrator
Last updated: Feb 04, 2022 by ernie addow
1 min read

Question:  I need to know what type of ethernet switches to get for V series panels.  Does it need to be "gig e or 10-100 switches Ok?

Answer:  The IVC-32 requires a 100BaseT network

Therefore it will works with a 10/100 baseT router or switch. If you are using the system in DHCP mode it would need to use a router which can assign IP addresses dynamically, if you are using a static IP you can use either a switch or router. 
We recommend that you give the IVC-32 a fixed IP address. The V-series panels can be set for either DHCP or Fixed IP address


 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.