Wireless: What is the difference between Tempest Seamless Roaming and Distributed Antenna Systems?

Wireless: What is the difference between Tempest Seamless Roaming and Distributed Antenna Systems?

Question:  We will need multiple coverage locations inside our auditorium to support wireless beltpack use.  I see that your Tempest 2400 system can be supported with both a feature called Tempest Seamless roaming and also with a distributed antenna system. What are the differences between the two approaches so that we can decide which one might be the best solution moving forward?
Answer: 
Tempest Seamless Roaming (TSR)
Tempest Seamless Roaming utilizes unique, coordinated frequencies on each RF transceiver so there is no harmful interference from one zone to another. This means that overlapping coverage of any amount is acceptable with no negative RF implications. Because of this, it is a relatively simple matter for an end user to implement a multi-zone installation in facilities and applications which utilize up to 11 RF transceivers (Base Stations, with or without Remote Transceivers). Implementations utilizing 12 or more RF transceivers may be accomplished with the assistance of a trained application engineer to help with the system design and/or implementation.
Distributed Antenna Systems
Prior to Tempest Seamless Roaming, multi-zone coverage in Tempest required the use of an RF distributed antenna system. This is a very valid method of wide area coverage implementation and will continue to be so in the future. This method works very well for many applications, but it is a highly customized, engineered solution that requires careful planning of antenna location, RF cable length and type, active bidirectional amplifier power level settings and other non-trivial considerations even for facilities needing only a few zones. This is because in distributed RF antenna solutions, each zone transmits the same exact signal as every other zone at the same time. In effect, each transmit antenna acts as a potential inference source to every other antenna in the system. This means that areas of coverage must be carefully planned and executed to ensure that zone overlap is tightly controlled so that harmful interference from one zone to another is minimized. This requires a highly qualified RF engineer to be involved in virtually all distributed RF antenna installations.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.