Matrix: What type of fiber cable / connector is needed for the Optocore X6R-FX and V3R-FX fiber interfaces?
The Optocore X6R-FX intercom and V3R-FX intercom interface units come as standard with multi-mode duplex LC optical connectors
The units are fitted with SFP transceivers so can be easily changed to Single mode duplex LC interfaces (customers can select the option to upgrade to single-mode transceivers please contact Clear-~Com sales).
Worst case reach is 700 meters with multi-mode transceivers and a 50 mm fiber cable, while with single mode transceivers and a 9 mm fiber, up to 70 km are possible. On the units Link 1 is the primary fiber connection between two Optocore units, Link 2 is a redundant fiber connection.
Dual LC fiber cable
connectors
The units are fitted with SFP transceivers so can be easily changed to Single mode duplex LC interfaces (customers can select the option to upgrade to single-mode transceivers please contact Clear-~Com sales).
Worst case reach is 700 meters with multi-mode transceivers and a 50 mm fiber cable, while with single mode transceivers and a 9 mm fiber, up to 70 km are possible. On the units Link 1 is the primary fiber connection between two Optocore units, Link 2 is a redundant fiber connection.
Dual LC fiber cable
connectors
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.