Matrix: Upgrade to EHX version 7.0.0 shows warning message "HCI Msg ID2 dropped, invalid protocol identifier"

Question:  I have successfully upgraded an Eclipse Median frame from version 5.2.4 to EHX version 7.0.0, the upgrade was successful, but when I look at the Matrix Event log there is a warning message that is repeated over and over, please see the screen shot below for the contents of the message: 





What does the HCI Msg ID 2 dropped, invalid protocol identifier mean?
Answer:  The message you’re getting in the EHX event log is indicating the following:
We use a new HCI protocol v2 EHX and the matrix is expecting to see the new protocol message.
 
If you are you using an old version of PM PRO,  Please un-install PM PRO and re-install from PM PRO the EHX software CD to stop the warning message seen in the EHX event log.
If you are using EHX and you haven't restarted EHX since updating the Matrix firmware from pre v7, restart EHX.
HCI v1 is part of ECs 52x stream
HCI v2 is part of HX stream

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.