/
Wireless: Does changing a FSII-BASE's System Identifier change its MAC address?

Wireless: Does changing a FSII-BASE's System Identifier change its MAC address?

Apr 06, 2019
Translate page

Yes it does. The last 3 characters of a *FSII-BASE's MAC address are derived from the base's System Identifier (found on the System Tab of the FSII Config Editor).
For example: The MAC address of a base with a System Identifier of CDF will be something like: '00:0E:98:02:0C:DF'. If the System Identifier were changed to 123, the MAC Address will change to '00:0E:98:02:01:23'.
Please note that this change will take effect only after the Base has been reset with a 'Reset On Apply' or power cycle.

*Applies to FSII-BASE-5 as well. Does not apply to FSII-Base-II.


Thanks to KE for finding and reporting this.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.