IP Products: How do I know if an LQ interface has successfully connected to an IVC-32 card?
After declaring an IVC-32 card connection in the LQ External Systems tab in the CCM browser add the following info
1. IVC card name (any name / label)
2. IP address and TCP port # of the IVC card (this should match the card setting of the IVC-32 card in the EHX / Eclipse matrix)
3. Add the IVC-32 port name, user ID, password (this should match the port User ID / password per port setting of the IVC-32 card in the EHX)
4. Assign each IVC-32 port to a LQ unit.
If connection is not successful, a yellow warning appears. Click on the yellow warning symbol for information.
When the LQ has successfully connected to the IVC-32 card, a green status LED appears as shown in the screenshot below:
1. IVC card name (any name / label)
2. IP address and TCP port # of the IVC card (this should match the card setting of the IVC-32 card in the EHX / Eclipse matrix)
3. Add the IVC-32 port name, user ID, password (this should match the port User ID / password per port setting of the IVC-32 card in the EHX)
4. Assign each IVC-32 port to a LQ unit.
If connection is not successful, a yellow warning appears. Click on the yellow warning symbol for information.
When the LQ has successfully connected to the IVC-32 card, a green status LED appears as shown in the screenshot below:
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.