Clear-Com Solution Finder Home
Spaces
Apps
Templates
Create
Solution Finder
All content
Space settings
Shortcuts
Clear-Com Main Website
Clear-Com Main Website
This trigger is hidden
Contact Clear-Com
Contact Clear-Com
This trigger is hidden
How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden
Content
Results will update as you type.
Show more above
•
Wireless: Why is there no Call Signal from my Tempest to my wired Clear-Com Party Line 2wire system?
•
Wirelles: Can I add Stage-Announce port to a WPL01 in the FSII config
•
Wireless; Can Tempest coexist with DX200 2.4GHz SSFH wireless intercoms?
•
Wireless:For FreeSpeak BaseStation, can the 2 party line channels and all 4 4 wire channels be used at the same time, giving 6 ch of independent comms?
•
Wireless: WTR-BAT wireless battery Material safety data sheet (MSDS)
•
Wireless: With the MD-XLR Adapter our headsets sound a little muffled. Why?
•
Wireless: With a FreeSpeak Base, can I connect a 2 x wire Partyline with a 4x 4-wire I/O?
•
Wireless: Will having 2 Tempest 2400 version 2.10.01 basestations next to each cause interference
•
Wireless: Will a 16 ohm impedance headset work on a WBS series beltpacks?
•
Wireless: Why when I have 4 Tempest belt packs on and when I turn on the 5th Tempest belt pack, the display tells me that slot is unavailable
•
Wireless CellCom / FS I: What do the 5 start up dots on the BP startup screen mean?
•
wireless : WTR / WBS 670/ 680 spare antenna parts
•
Wireless : Do you have a list of Tempest beltpack spare parts
•
Wireless : Can I extend the antenna on a DX210/410/300/100/121 by 40m (120ft)
•
Wireless : Audio distortion between DX, LQ and HelixNet
•
Wireles: What is a Reverse Polarized Connector?
•
Wireless: When I plug in the RTS line, my voice level in the Pro850 beltpac headset drops
•
Wireless IFB: How do I adjust the block 26 frequencies on my PRC-2 receiver?
•
Wireless IFB: How do I adjust the block 25 frequencies on my PRC-2 receiver?
•
Wireless IFB: How do I adjust the block 24 frequencies on my PRC-2 receiver?
•
Why do the LEDs on my CellCom/FreeSpeak basestation seem to lightly blink?
•
AC60-W-MOUNT AC-60 Charger Wall Mount
•
Can a CCT-9RT be used with a Tempest 2400 series?
•
Can a CCT-RT be used with the Tempest 900 series?
•
Can DX121 system interface with IFB and PK-7?
•
Can I Upgrade My FreeSpeak Base to the Latest Firmware?
•
Can I use single strand fiber / BiDirectionbal SFPs between my new Free Speak II base II and the new splitter?
•
Can we connect the DX100 to other bases?
•
Cellcom / Freespeak upgrade issue. FW Not loaded to both banks of RAM
•
Clearcom AC60 Battery Charging and UPS Supplies
•
DOES THE CEL-FS-CHRGR WORK WITH THE FSII?
•
Does the DX121 have a battery back up option
•
Drake 4000: Registering CellCom CEL-BP Beltpacks with CMAPSi.
•
DX100 Long Range / Repeater
•
DX Bases Primary and Secondary Mode
•
DX-410 - Too Many Buttons
•
Free Speak: Can I power a FS II Base II with an external battery?
•
Freespeak Event Log Info
•
Freespeak II (FSII) No Audio
•
Freespeak II antenna dimensions
•
FS Edge IP Transceiver LED Indications
•
FS II: Can't upgrade my FS-II belt packs using the serial cable
•
FS-II: IP antennas not working on Cisco WS-2960CX-8PC-L
•
FSII IP Transceiver LED Indications
•
FSII-BP19 BELT CLIP
•
HME DX Question for ISO. Why don't the wired system users hear it?
•
HME DX-210 vs 2x RTS Party Lines
•
How can I control the microphone on a FSII Beltpack remotely?
•
How do I connect my PC to the FSII Base-II?
•
How do I find the mDNS name of the IP-Transceiver (IP-Antenna)
•
How do I to find Tempest Base & Belt Firmware/Radio version Information?
•
How do we add an additional set of antennas for our Tempest system? Do you sell the hardware?
•
How does Tempest work with Wi-Fi all in the same band?
•
How to find which DECT (country, frequency) a CellCom or FreeSpeak I system has other than connecting to software?
•
How to replace the FSII BP Door (video)
•
How to replace the FSII BP Keypad (video)
•
How to set the switches to select frequency that the PRC-2 receives
•
How to Update a FSII BaseII Firmware/Software
•
I am end-user and I want to purchase AC40A battery charger. Can I purchase this from you?
•
I am looking for a battery for the tempest line, what is the part number?
•
I can't register my beltpacks to the DX210 base
•
I cannot find a DX product on my pricesheet
•
I have an existing DX210 system, can I attach a mic and speaker to it?
•
I have Red Icon on my Antenna (IPTCVR) in the Transceivers page
•
In a multiple BS200 (DX200) station setup, can beltpacs transition from one base station to the other, like a cell tower/phone system?
•
Independent audio program Input control for FSII beltpack
•
Information: Practical Wireless Spectrum Overview for EMEA and US
•
IPT: When trying to access an IP antenna's browser, sometimes the message "Not Found" is displayed.
•
Is the WBS-670/680 and the WTR-670/680 available in the C3 band?
•
Is the WBS-670/680 and the WTR-670/680 available in the C6 band?
•
Is the WTR-670/680 -C6 band available in the United States?
•
Is there a traveling case for the DX100 or MB300es systems?
•
My Tempest beltstation is not retaining the name changes
•
My Tempest BP does not connect to base and doesn't display the Radio Version
•
Other: Does Clear-Com still repair the HME 800 wireless system
•
PA: Registering a Secondary DX-series base station to a Primary
•
Power supply info for Pro850 battery charger
•
Proper charging of the BAT850 Rechargeable Battery
•
PTX-3 - I am trying to unlock the PTX-3 IFB transmitter and can not find in a manual how to unlock the PTX-3
•
Service: PD4007 CellCom/Freespeak programming cable
•
Service: What is the part number for the replacement FSII BP and Helixnet II BP beltclip
•
Service: What is the pin out for the FreeSpeak registraion cable
•
T Desk will not connect to Tempest BaseStation
•
Tempest 2 Channel Dual Listen Mode (Steve Sandford)
•
Tempest Antenna Placement
•
Tempest Belt Station Wireless Iso (Steve Sandford)
•
Tempest Belt Stations Manual Switching Between Base Stations (Steve Sandford)
•
Tempest Nulling and ECAN / Echo Procedure for 2 Wire Party Line Interface
•
Tempest Tip of the Week - Spilt Mode
•
Tempest Tip of the Week - Tempest and WiFi.
•