/
Wireless: DX BP BAT50 battery not reading correctly, powering up BP or not charging

Wireless: DX BP BAT50 battery not reading correctly, powering up BP or not charging

Apr 06, 2019

If you find aBAT50 is not reading correctly or not powering up your DX BP please trythe following:
The minimumworking voltage to power the battery’s fuel gauge and authenticationcircuit is 2.7V. Abattery with a lower voltage in this condition may appear to be ‘defective’ because of longerthan usual time to re-charge and recover from the low condition.It is recommended to recharge a battery for at least 5-6hours when it’s in this low voltage condition before deciding to exchange it out.  Please note, Federal and International regulationrequire that Li-Ion batteries are packaged separately and to be no more than30% charged when transported. To meet this requirement, our Li-Ion batteriesare shipped  at ≤30% of voltage capacity.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.