How do I route HelixNet HMS SA Audio to an HRM SA Port or Linked LQ Port?

Due to resource limitations of the HMS (HelixNet Main Station), the HMS is not able to assign its SA port to a channel.There is a solution that allows the user to route the HMS SA audio to a HRM (Remote Station) SA Port or to a linked LQ port.

Create an XLR-3F to RJ45 cable where the audio pins from the XLR map to pins 4 & 5 on the RJ45 (See attached image/PDF)

Connect XLR end to the HMS’s SA OUTPUT

Connect RJ45 end to one of the HLI-4W2 ports

Create a channel labelled “Stage Annc” and Assign the HLI-4W2 4-wire port

Then also assign the linked LQ 4W port which the SA gear is attached (this is just one use case)
Other options would be to:

Assign the SA port from an HRM paired to the HMS to this channel to output the analog audio out that SA port
Assign an HLI-4W2 port on another linked HMS

Now pressing on the HMS SA key will result in:

HMS mic audio being routed to the SA XLR port on the rear of the HMS
That Analog audio is then routed back into the HMS via the HLI-4W2 4-wire port
The audio is then encoded into a digital signal and routed over the network to the linked LQ 4-wire port or HRM.

	File	Modified
Labels No labels Preview View	PDF File RJ45 Basestation 4wire port to XLRs adapter.pdf RJ45 Basestation 4wire port to XLRs adapter.pdf	Apr 06, 2019 by Administrator

Solution Finder

How do I route HelixNet HMS SA Audio to an HRM SA Port or Linked LQ Port?

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..