/
Wireless: What functionality does a 7-pin XLR FSII beltpack provide?

Wireless: What functionality does a 7-pin XLR FSII beltpack provide?

The FSII 2.0 software / firmware release provides the user the option to incorporate a headset with a 7-pin XLR (XLR7)
on a FSII 1.9 or 2.4 GHz beltpack with 7-pin XLR in order to activate a PTT 1 or PTT 2 function via a logic trigger
activation.  You can use the Freespeak II Configuration Editor to assign destinations for each of the four beltpack
talk keys, A, B, C and D. If you are using a 7-pin headset, you can also configure the two press-to-talk buttons
(PTT1 and PTT2).

FSII beltpack 7-pin XLR connector pin outs:




In order to activate PTT 1 or PTT 2 the user will need to take PTT logic on pin 6 or pin 7 and
ground it to pin 3 via a switch closure. 
The FSII configuration editor is then used to assign the selected PTT to a talk destination. 

Logic 1 / 2 (PTT 1, PTT 2) can be configured as follows















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.