/
Wireless: How do I read / interpret the FS II beltpack site survey screen?
Wireless: How do I read / interpret the FS II beltpack site survey screen?
By Administrator
Apr 06, 2019
Freespeak II Beltpack Site Survey Mode
Note: Site Survey – BP CONNECTED TO A SYSTEM
Note: This requires that the FS II beltpack have full menu access set in EHX software or Config Editor software
Note: This option is only available if the BP is connected to a system (referred to as the current system)
Note: The A & B talk keys will operate as normal when in this mode
To access site survey mode place the beltpack into master menu mode / scroll to "Site Survey" then press the "D" button to enter
Display lists all visible RFPs (Transceiver Antennas) ONLY connected to the current system
Shows 2 digit RPN number only (To get antenna # subtract 5 from the RPN). The Current Antenna is shown at the top of display.
Note: Site Survey – BP CONNECTED TO A SYSTEM
Note: This requires that the FS II beltpack have full menu access set in EHX software or Config Editor software
Note: This option is only available if the BP is connected to a system (referred to as the current system)
Note: The A & B talk keys will operate as normal when in this mode
To access site survey mode place the beltpack into master menu mode / scroll to "Site Survey" then press the "D" button to enter
Display lists all visible RFPs (Transceiver Antennas) ONLY connected to the current system
Shows 2 digit RPN number only (To get antenna # subtract 5 from the RPN). The Current Antenna is shown at the top of display.
, multiple selections available,
Related content
Wireless: Freespeak II beltpack "System Connect" display screen messaging
Wireless: Freespeak II beltpack "System Connect" display screen messaging
More like this
Wireless: How can I access menus on a FSII beltpack when the menu access is disabled in software?
Wireless: How can I access menus on a FSII beltpack when the menu access is disabled in software?
More like this
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
More like this
Wireless: FS II transceiver antenna coverage capabilities / expectations
Wireless: FS II transceiver antenna coverage capabilities / expectations
More like this
FSII and Edge IPTs standalone site survey mode
FSII and Edge IPTs standalone site survey mode
Read with this
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.