IP Products: How do I setup LQ linking over WANs / Internet with public IP addresses?
LQ / LQR Linking over a WAN or Internet
If the user is linking multiple LQs over Internet or WAN, the IP addressing of the units becomes more complicated because
the units use external addressing and port-forwarding to navigate firewalls. The LQ units must be able to reach the Link-Master.
The Link-Master uses TCP port 80 for management and TCP/UDP port 655 for audio. You will need to create port-forwarding
rules within your firewall to make these ports externally accessible to the Link-Master device.
The Link-Master’s external IP and port will need to be configured within the Network page of the CCM.
The Link-Member external IP address will need to be configured within the Network page of the CCM.
See section 7 of the LQ / LQR user manual for detailed information on linking over the internet or WAN, setting up port forwarding
and getting an external IP address.
Section 7 is attached as a PDF below.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.