/
Wireless: Need a call signal back to main wired PL station from a DX210 system.
Wireless: Need a call signal back to main wired PL station from a DX210 system.
Unfortunately the DX series radio line is unable to send or receive call signal from the wired PL comms
Note: the CL200 call light adapter was discontinued mid-2013
Note: the CL200 call light adapter was discontinued mid-2013
, multiple selections available,
Related content
Wireless: DX210 base station 4-wire pin outs RJ45 connector
Wireless: DX210 base station 4-wire pin outs RJ45 connector
More like this
Wireless: DX210 base station low / high / full frequency band setup
Wireless: DX210 base station low / high / full frequency band setup
More like this
Wireless: Using the DX210 with an RTS Party Line System
Wireless: Using the DX210 with an RTS Party Line System
More like this
Wireless: HME DX210 to Motorola CP200 or other handheld radio.
Wireless: HME DX210 to Motorola CP200 or other handheld radio.
More like this
Wireless: Is the DX-210 wireless system compatible with Clear-Com Pro PL and Encore PL products?
Wireless: Is the DX-210 wireless system compatible with Clear-Com Pro PL and Encore PL products?
More like this
Wireless: Do you have a part number for the interface to connect a DX121 to the base station CS-702 ?
Wireless: Do you have a part number for the interface to connect a DX121 to the base station CS-702 ?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.