/
Wireless: Can the DX300 and DX200 wireless base stations be daisy chained together in the same system?

Wireless: Can the DX300 and DX200 wireless base stations be daisy chained together in the same system?

Apr 06, 2019
Translate page

You can connect the two bases by way of the 4-wire ports on both bases but you are not able to daisy chain them in order to add additional bases through a 4-wire connection.This allows a BP on basestation # 1 to talk / listen to other BPs on basestation # 2 (but only via the 4wire connection between the two bases)
Also if the two basestations are near to each other we recommend you set one basestation to be master and the other into secondary RF mode. This allows the two basestations to synchronize their RF transmissions and avoid RF clashes

Also unfortunately our beltpacks are not designed to roam from base to base.


CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.