Wireless: I want to deactivate one of the channels on the BP210 is this possible?
Unfortunately you can not deactivate either one of the channels on the BP210 at this time. If the BS210 (DX210) is changed to single mode from dual mode then all of the beltpacks will be in single mode defaulting to IC1 only.
If you require a system with some beltpacks with dual channel function and some beltpacks with single channel function
The options are: a) using a DX210 basestation you have a mix of BP200 (which is a single channel beltpack.) and BP210 beltpacks Note: The BP200 will only default to IC1 on the BS210.
b) Look at using the BS300 system : which uses BP300 units which can be selectively set to either Chnl A or B
If you require a system with some beltpacks with dual channel function and some beltpacks with single channel function
The options are: a) using a DX210 basestation you have a mix of BP200 (which is a single channel beltpack.) and BP210 beltpacks Note: The BP200 will only default to IC1 on the BS210.
b) Look at using the BS300 system : which uses BP300 units which can be selectively set to either Chnl A or B
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.