/
Matrix: How do I connect a Telex BTR-80N wireless basestation to a Eclipse frame via 4-wire?
Matrix: How do I connect a Telex BTR-80N wireless basestation to a Eclipse frame via 4-wire?
By Administrator
Apr 06, 2019
Question: I am looking to construct a custom cable that would allow me to connect my Telex
BTR-80N wireless intercom to a Eclipse Median matrix. I would assume that this is a direct
connection via 4-Wire ports?
Answer: Yes a 4-wire connection between these two devices is possible using 4wire ports on
each device. The BTR-80N uses an RJ-11 connector and the Eclipse frame uses an RJ-45 connector,
so you will have to construct a custom cable to make the connection. See diagram below for the wiring
pinouts for both devices using a CAT-5 patch cable with one end cut off and re-crimped with a RJ-11
connector.
In the EHX configuration setup set the BTR-80N connected port as a 4wire "Direct"
BTR-80N wireless intercom to a Eclipse Median matrix. I would assume that this is a direct
connection via 4-Wire ports?
Answer: Yes a 4-wire connection between these two devices is possible using 4wire ports on
each device. The BTR-80N uses an RJ-11 connector and the Eclipse frame uses an RJ-45 connector,
so you will have to construct a custom cable to make the connection. See diagram below for the wiring
pinouts for both devices using a CAT-5 patch cable with one end cut off and re-crimped with a RJ-11
connector.
In the EHX configuration setup set the BTR-80N connected port as a 4wire "Direct"
Looking for labels? They can now be found in the details panel on the floating action bar.
Related content
Wireless: What is the best way to connect multiple BTR base stations to an Eclipse Frame?
Wireless: What is the best way to connect multiple BTR base stations to an Eclipse Frame?
More like this
Wireless: How do I wire a BS121 base station 4-wire connection to an Eclipse frame RJ45 port?
Wireless: How do I wire a BS121 base station 4-wire connection to an Eclipse frame RJ45 port?
More like this
Partyline : How do I connect a IF4W4 unit to an Eclipse Matrix or Wireless basestation (FreeSpeak, DX210, Tempest, WBS)
Partyline : How do I connect a IF4W4 unit to an Eclipse Matrix or Wireless basestation (FreeSpeak, DX210, Tempest, WBS)
More like this
Wireless: Can I interface a DX-121 system directly to an Eclipse Matrix frame port?
Wireless: Can I interface a DX-121 system directly to an Eclipse Matrix frame port?
More like this
Wireless: Can the RW800 Base Station connect to a Matrix 4-wire port?
Wireless: Can the RW800 Base Station connect to a Matrix 4-wire port?
More like this
Wireless: 4-wire Matrix intercom pinouts for the Pro850 Wireless System
Wireless: 4-wire Matrix intercom pinouts for the Pro850 Wireless System
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.