/
Wireless: Can I change the Tempest base station operating mode via the front panel Menu / Enter buttons?
Wireless: Can I change the Tempest base station operating mode via the front panel Menu / Enter buttons?
Question: I'm onsite with a Tempest 2400 system with 2.10.01 firmware / radio firmware 1.15. Can I change operating modes via the front panel programming on the base station, I don't have access to the programming software on a PC?
Answer: Yes, via the front panel programming buttons on the Tempest base station the user can change from Normal Mode to Split Mode and or Shared Mode. The base station must have 2.00.01 firmware or higher and the radio firmware in the base station must be 1.15 or higher to use all three operating mode.
To change the mode the base station operates in from the base station follow these steps:
1. Press the base station Menu button to access the menus
2. Scroll to item 5 on the Main Menu (Mode Settings) and press the Enter button
3. Scroll to item 1 on the Mode Setting Menu and press the Enter button
4. In the Mode Setting Menu the user can select from the following items:
(1) Normal Mode
(2) Split Mode
(3) Shared Mode
5. Scroll to the desired mode of operation and press the Enter button to place the check mark next to it.
6. Press the Menu button to back out of the menus.
7. The base station LCD screen should reflect the operating mode selected.
Answer: Yes, via the front panel programming buttons on the Tempest base station the user can change from Normal Mode to Split Mode and or Shared Mode. The base station must have 2.00.01 firmware or higher and the radio firmware in the base station must be 1.15 or higher to use all three operating mode.
To change the mode the base station operates in from the base station follow these steps:
1. Press the base station Menu button to access the menus
2. Scroll to item 5 on the Main Menu (Mode Settings) and press the Enter button
3. Scroll to item 1 on the Mode Setting Menu and press the Enter button
4. In the Mode Setting Menu the user can select from the following items:
(1) Normal Mode
(2) Split Mode
(3) Shared Mode
5. Scroll to the desired mode of operation and press the Enter button to place the check mark next to it.
6. Press the Menu button to back out of the menus.
7. The base station LCD screen should reflect the operating mode selected.
Looking for labels? They can now be found in the details panel on the floating action bar.
Related content
Wireless: Does Program input on Tempest base stations work in all modes?
Wireless: Does Program input on Tempest base stations work in all modes?
More like this
Wireless: How do I set the Tempest base to manual IP mode?
Wireless: How do I set the Tempest base to manual IP mode?
More like this
Wireless: Can I program Tempest beltpacks settings from the base station?
Wireless: Can I program Tempest beltpacks settings from the base station?
More like this
Wireless: Changing the Tempest Beltpack from Normal to Shared mode
Wireless: Changing the Tempest Beltpack from Normal to Shared mode
More like this
Wireless: Where do I find the network number and lockout code menus on the Tempest base station?
Wireless: Where do I find the network number and lockout code menus on the Tempest base station?
More like this
Wireless: Can a pre 2.0 Tempest system be upgraded to 2.0 functionality?
Wireless: Can a pre 2.0 Tempest system be upgraded to 2.0 functionality?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.