/
Partyline, 2-Channel beltpack/3-pin XLR input/6-pin headset

Partyline, 2-Channel beltpack/3-pin XLR input/6-pin headset

Apr 06, 2019

Clear-Com offers a range a of 2 channel beltpacks
RS-623 (current) Similar to RS-603 with split-ear operation via 6-pin male XLR headset connector. Intercom channels can be mixed into the opposite ear with V-Pack software. Requires a TWC-701 or TWC-704 (sold separately) for two-channel operation.
RS-623R (current)
Similar to RS-603 with split-ear operation via 5-pin female XLR headset connector. Intercom channels can be mixed into the opposite ear with V-Pack software. Mono compatible.
The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.
Obsolete unit
RS-522TW

This beltpack has 3-pin XLR Intercom input, and also 6-pin XLR headset.
Channel A and Channel B are fed into a
stereo headset (CC-260-6)
Need to use the TWC-701 2-channel active combiner to use this beltpack in two channel mode
(will operate single channel without the TWC-701)

Please contact our Sales Department if there are any questions or if you model is not listed above
http://www.clearcom.com/product/partyline/wired-beltpack

Comments

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.