/
Partyline: AB-100 / AB-120 6 Pin Out to a Sennheiser HMD 26-II-600-8 Dynamic Broadcast Headset

Partyline: AB-100 / AB-120 6 Pin Out to a Sennheiser HMD 26-II-600-8 Dynamic Broadcast Headset

Apr 06, 2019
Translate page

If you SPECIFICALLY have a Sennheiser HMD 26-II-600-8 or -7 Dynamic Broadcast Headset and want to connect to one of our Announcer Boxes this may work for your particular headsets stranded cable. Always consult your headset manufacturers manual for correct wiring. 
The standard AB-100 / AB-120 is shipped with a headset connector designed for use with any type of announcer headset. Connection is via a Switchcraft™ XLR-6F connector on the unit. The pin out of the headset connector is as follows:PIN#      1   Microphone Lo (-)      2   Microphone Hi (+)      3   Headphone Common (In this instance: Tie the headphone lows (-)  to pin 3 )      4   Left Headphone (+)      5   Right Headphone (+)      6   Microphone Shield (Drain Wire)  The mic pair should have a shielded mylar/foil/other sheath and a drain wire. Attach the drain wire to pin 6. Just fold back the other sheath.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.