/
Matrix: How do I get rid of Matrix +3 inward DTMF check marks in the station port menu?
Matrix: How do I get rid of Matrix +3 inward DTMF check marks in the station port menu?
By Administrator
Apr 06, 2019
Inward DTMF check marks should only be applied to Matrix +3 interfaces (especially TEL-14 telephone interface). This allows a user to call into the Matrix +3 frame with a TEL-14 interface and via preprogrammed one or two digit codes access various ports on the Matrix +3 frame.
The setup station port menu screen is greyed out for panels, but if the user goes into the configure menu / local preferences screen and removes the check mark for nearby station partial only then the software will place a check mark in the ports menu for that station.
This is a known bug in M+3 software versions from 2.41 and earlier.
The setup station port menu screen is greyed out for panels, but if the user goes into the configure menu / local preferences screen and removes the check mark for nearby station partial only then the software will place a check mark in the ports menu for that station.
This is a known bug in M+3 software versions from 2.41 and earlier.
, multiple selections available,
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.