IP-Voice: What is the pin out for the audio ports on a Voice2 unit

There 8 audio ports on the Voice2 unit 
4 are labelled "matrix" and pinned to use a straight CAT5 cable from the Voice2 unit to a Clear-Com matrix or a Drake 4000S2 matrix
4 are labelled "panel" and pinned to use a straight CAT5 cable from the Voice2 unit to a Clear-Com panel or Drake 4000S2 panel
Voice2 Matrix RJ45
 pin 1RS-422 TX+ (data INTO matrix)pin 2RS-422 TX- (data INTO matrix)pin 3AUDIO O/P+ (audio INTO Matrix)pin 4AUDIO I/P+ (audio FROM Matrix)pin 5AUDIO I/P_ (audio FROM Matrix)pin 6AUDIO O/P- (audio INTO Matrix)pin 7RS-422 RX+ (data FROM matrix)pin 8RS-422 RX- (data FROM matrix)  Voice2 panel RJ45
 pin 1RS-422 RX+ (data FROM panel)pin 2RS-422 RX- (data FROM panel)pin 3AUDIO I/P+ (audio FROM panel)pin 4AUDIO O/P+ (audio INTO panel)pin 5AUDIO O/P- (audio INTO panel)pin 6AUDIO I/P_ (audio FROM panel)pin 7RS-422 TX+ (data INTO panel)pin 8RS-422 TX- (data INTO panel)

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.