/
Matrix: What boot proms do I need to use for Drake 4000 series II working on Eclipse and Drake matrices

Matrix: What boot proms do I need to use for Drake 4000 series II working on Eclipse and Drake matrices

By Administrator
Apr 06, 2019
Drake 4000 series II panels can be upgraded from the Drake 4000 matrix to work on a Eclipse matrix.To convert the panels to work on the Eclipse matrix. The physical BOOT prom inside the panel needs to be changed. The BOOT prom type is a  27C512K You will require a Eprom programmer (burner)  in order to burn the Eclipse BOOT file (S-rec) into the blank 27C512K prom
Electronic copies of the  BOOT prom firmware can be obtained from: The Eclipse matrix version of the boot proms are available on the ECS CD The Drake 4000 boot proms are available by contacting your local Clear-Com service centre

This Solution is dated: Nov -2009 Please check the solutions page for possible later versions on the same topic



DRAKE
non-rohsrohs4224- boot prom BOOTPR_60BBOOTPR_.70i_96004222-boot promBOOTBR_60DBOOTBR_70i_9600












ECLIPSE
non-rohsrohs4224- boot prom BOOTPR_60E_19200BOOTPR_.70i_192004222-boot promBOOTBR_60E_19200BOOTBR_.70i_19200


Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.