Matrix: How do I tirgger a matrix control using HCI (Host computer interface ) protocol can you

Owned by Administrator
Last updated: Apr 09, 2019 by Justin Emge
1 min read

Use this custom command which willprovide you with a table of GPIO Control labels and their associated Card/pinnumbering .
enter the card/pin number in to the HCI command line
 








Go to diagnostic > event log > request info >custom Message code = 56 Param # 1 = 6 Hit send



























Trigger the lowest card/pin number Example for CTOO1 – trigger card/pin 28 pin 6

BTW use custom 56.5 To output the physical GPIOs &
custom 56.6 outputs the virtual Controls - Card/pins

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.