Party-Line: Combining the announce output from multiple PL stations

Question:  We are trying to use the Announce feature and need some guidance.  We currently have a MS-702 and
two RM-702 stations in our system.  We have a speaker plugged into the announce output of the MS-702 and it
functions when the announce button is used but we would like to be able to use the announce button on the RM-702
to output through the same speaker so we can announce from any of the 3 stations.  Is this possible and if so, how?

Answer:  In order to combine the announce outputs on the one MS-702 and two RM-702s you will need to do this
externally with some 3rd party hardware.  The balanced line level announce outputs on the CC party-line stations are
only routed to the rear panel 3-pin XLR on the MS-702 and the rear panel DB-15F connector on the RM-702.  
There is a company called Radio Design Labs that makes a lot of small line level mixers  and this would be the best way
to combine the announce outputs into one common announce output from all three units.  
Here is a link to their site and one possible solution:  http://www.rdlnet.com/product.php?page=85#!prettyPhoto






















  File Modified

PDF File PL announce to powered speaker.vsd.pdf PL announce to powered speaker.vsd.pdf

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.