/
Wireless: What are the firmware version numbers for Tempest 2.00.01?
Wireless: What are the firmware version numbers for Tempest 2.00.01?
By Administrator
Apr 06, 2019
The Tempest 2400 system (both 2 channel and 4 channel systems) operating at version 2.0 which includes normal mode, split mode and shared mode operation has the following firmware versions for base station and beltpacks.
To access the base station diagnostic screen enter the menu screen and cycle thru / Basestation settings / Tech Menu / Diagnostic Mode to see the diagnostic screen shown below:
The PIC firmware version should be 02.00.00The DSP firmware version should be 02.00.01Radio version should be 1.14 or 1.15
To access the beltpack diagnostic screen enter the menu screen and cycle thru / Beltpack settings / Tech Menu / Diagnostics to see the diagnostic screen shown below:
The firmware version should be 02.00.01The radio version should be 1.15 in order to access Normal, Split or Shared ModeIf the radio version reads 1.14 only Normal and Split Modes can be accessed
NOTE: 2 Channel and 4 Channel systems use different firmware files. Codeloader is used to upgrade the firmware files. Go to the www.clearcom.com web page / support / software downloads to access the firmware files and codeloader. The latest released TDesk software supporting version 2.0 release is TDesk version 1.4.03
Solution update: See Clear-Com firmware screen for latest version of Tempest firmware http://www.clearcom.com/support/software-versions
To access the base station diagnostic screen enter the menu screen and cycle thru / Basestation settings / Tech Menu / Diagnostic Mode to see the diagnostic screen shown below:
The PIC firmware version should be 02.00.00The DSP firmware version should be 02.00.01Radio version should be 1.14 or 1.15
To access the beltpack diagnostic screen enter the menu screen and cycle thru / Beltpack settings / Tech Menu / Diagnostics to see the diagnostic screen shown below:
The firmware version should be 02.00.01The radio version should be 1.15 in order to access Normal, Split or Shared ModeIf the radio version reads 1.14 only Normal and Split Modes can be accessed
NOTE: 2 Channel and 4 Channel systems use different firmware files. Codeloader is used to upgrade the firmware files. Go to the www.clearcom.com web page / support / software downloads to access the firmware files and codeloader. The latest released TDesk software supporting version 2.0 release is TDesk version 1.4.03
Solution update: See Clear-Com firmware screen for latest version of Tempest firmware http://www.clearcom.com/support/software-versions
, multiple selections available,
Related content
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
HKB showing Helixnet firmware mismatch (Feb-2024)
HKB showing Helixnet firmware mismatch (Feb-2024)
More like this
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
Wireless: What system components do I need to replace to convert a CellCom system to a Freespeak II system?
More like this
FSII BP: what does the (i) mean in the BT version
FSII BP: what does the (i) mean in the BT version
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.